Output voltage of zero at stator output means full voltage drop before RR. Zero voltage means full-output of stators are going to ground. It’s like measuring ground-wire of light-bulb, it’s going to be zero after all power has been dissipated by bulb. More accurate to measure stator output in amps rather than voltage.
Here’s good test:
1. Measure VAC and amps output of stator @4000rpms with RR connected with no load
2. Measure VAC and amps output of stator @4000rpms with RR connected and powering headlight
Last futzed with by DannoXYZ; April 13th, 2020 at 01:48 PM.
|