Quote:
Originally Posted by divil
The throttle cable adjuster is round.
|
If you are talking about the
throttle cables, please, read these:
http://faq.ninja250.org/wiki/Adjusti...hrottle_cables
http://faq.ninja250.org/wiki/Throttl...is/re-assembly
http://faq.ninja250.org/wiki/Lubing_the_cables
Keep all the cables clean and lubed.
Often, when the regulator of any cable is not sufficient to eliminate the slack, the cable is in its way out, with some broken strands of wire and it has elongated beyond adjustment.
Yes, for the round counter-nut of the clutch cable, you can use pliers, but you can protect its surface using a piece of leather or sandpaper between the jaws and the nut.