Quote:
Originally Posted by Obi-Ron Kenobi
|
Cant see the pics on your thread since im not a member!
You are needing pics of how i attached the Tachometer wires? Or when you say tach do you mean the whole Vapor Trail Tech speedometer together.
Here is the instruction on it, its very easy and if you dont understand it then let me know so i can explain it:
Quote:
Tachometer: This was the easiest, All you have to do is remove the Black RPM wire and the Black/Yellow Ground (Power -) wire from the harness. Then you take your Tach wire from the vapor that has a resistor on the end of it and it will be black and red. You split them since they will be stuck together then strip the wire to where it is naked and wrap the Red vapor wire to the black (RPM) wire female connector on the ninja 250 harness. The you take the Black wire on the vapor trail tech and attach it to the Black/Yellow wire from the ninja 250 Harness and wrap it around the female connector. When you are done, either shrink tube it or tape it VERY GOOD.
If you buy Male connectors then it will make it cleaner and more reliable, FYI.
|