Yes, lots of room for 150/60..
Another install tip: I cut about 1 inch off the brake side hugger tip and tucked the end behind the brake hose loop. You may need to bend the loop wider a bit but it now fits better and helped center the hugger. Still used zip ties.
Lastly, since my wife's 250 is lowered 1.5", there was very little clearance between the hugger and bottom of the battery tray so I notched out about an inch of the hugger that sits under the battery tray. So far no rubbing and looks totally stock.
Good luck!
Quote:
Originally Posted by TheJimmyEnglish
Will it fit a 150/60 tire?
|