|
I have made some progress over the last few days.
The front caliper is reassembled, and installed. ( The DOT 3 brake fluid was all I had on hand, and only used to wet the seals for reassembly. I'll use a fresh bottle of DOT 4 to fill the brakes upon final assembly. )
The engine is properly installed now.
The wiring harness is routed, and all front connections are complete.
The radiator, associated hoses, exhaust header, and headlight are installed.
I need to paint both of the handle bars, and then I can complete the front brake, and install the controls.
__________________________________________________
... can't stop updating the bike!
|