ninjette.org - View Single Post - Room for Ninja 300 clip-ons

sprinter · July 25th, 2013, 10:48 AM

The stock shock is 320mm eye-to-eye, so I'm going up quite a bit higher on the rear. I ran it at 324mm the first time out and it still felt like it could be higher, Ohlins is saying 325-330mm depending on which tires, other setup, etc. for the TTX shock. I had the forks at 5mm above the triple to start with, and it was nowhere near being unstable, so I think I can go quite a bit lower on the front, if it is unstable I'll raise it back up a little bit.

July 25th, 2013, 10:48 AM	#30
sprinter ninjette.org member Name: JJ Location: USA Join Date: Jul 2013 Motorcycle(s): 2018 Ninja 400 Race Bike (in progress...) Posts: 126	The stock shock is 320mm eye-to-eye, so I'm going up quite a bit higher on the rear. I ran it at 324mm the first time out and it still felt like it could be higher, Ohlins is saying 325-330mm depending on which tires, other setup, etc. for the TTX shock. I had the forks at 5mm above the triple to start with, and it was nowhere near being unstable, so I think I can go quite a bit lower on the front, if it is unstable I'll raise it back up a little bit.