Quote:
Originally Posted by Old_Six_Fitty
For the overflow bottle, maybe just 8-12 inches of 2" or 3" round PVC with an end cap on the bottom end, and screw-on for the top. Drill two small holes in the top cap, and push the overflow hose in one of these until its near the bottom. If the white color clashes with your sano styling, then bust out the black paint.
Can fit pretty cleanly against black tube frame and nearly disappear.
|
My goal is to either do the pipe along the frame, or something see thru that I can leave a small "sight glass" to keep tabs on the coolant.
Im also managed to clear out the under seat stuff and will run whatever wiring is still needed under the tank and under the seat.
I would like to get some tygon tubing for the rear brake reservoir and finally purchase the throttle tube. Clip ons and filter will be here next week. Then once the engine is degreased, and valve clearances are checked I will mount it back to the frame