Quote:
Originally Posted by falonso0
Hi! I'm fernando from Argentina. I recently installed a Zx6 07/08 pump on my ninja 250 2009 but when tested the lever is very strong and brake a half of the axial original pump.. Do you have some suggestion??
|
If the air is bled out of the brake line, there should be much less movement at the lever, since the new MC pushes more fluid so it takes less lever pull to build the same pressure in the line.
As another aside, I swapped the stock MC from my '02 Superhawk (I had upgraded that to a 954 MC) and the same result: Hugely improved feel at the lever, much less pull, and much more immediate brake response. I still need to do an upgraded SS line and get some better pads put on, but just swapping the MC moved the front brake up to 'satisfactory' from deep in 'full-on sketchitude' territory.
__________________________________________________
Igitur qui desiderat pacem, praeparat bellum...
