ninjette.org - View Single Post

jkv45 · December 21st, 2018, 07:02 AM

Watch this video on adjusting and aligning the chain -

http://www.canyonchasers.net/video/howto/chain.php

Can't say I have any idea how that would have happened, but check everything over, replace what's required, and make sure you have the wheel pulled forward tightly and the axle nut torqued to the required spec (98 Nm or 72 Ft Lbs.)

Torque specs for New Gen - https://faq.ninja250.org/torque/ex250j/

More Ninja Final Drive maintenance and adjustment info - https://faq.ninja250.org/wiki/Final_Drive

December 21st, 2018, 07:02 AM	#6
jkv45 Rev Limiter Name: Jay Location: WI Join Date: Jul 2013 Motorcycle(s): '06 SV650n, '00 Derbi GPR, '64 CA77 Dream 305, '70 CL450 Scrambler, numerous dirt bikes Posts: A lot. MOTM - Jun '18, Oct '16	Watch this video on adjusting and aligning the chain - http://www.canyonchasers.net/video/howto/chain.php Can't say I have any idea how that would have happened, but check everything over, replace what's required, and make sure you have the wheel pulled forward tightly and the axle nut torqued to the required spec (98 Nm or 72 Ft Lbs.) Torque specs for New Gen - https://faq.ninja250.org/torque/ex250j/ More Ninja Final Drive maintenance and adjustment info - https://faq.ninja250.org/wiki/Final_Drive