View Single Post
Old January 21st, 2019, 03:58 PM   #37
mistified
ninjette.org member
 
Name: Ed
Location: Vancouver
Join Date: Dec 2018

Motorcycle(s): Ninja 250 , Rebel 500

Posts: 13
Pulled the plugs: Slightly white. Gap still correct when I put them in at 0.035 inches


Pulled the carbs, noticed some black residue nearby the holes. Should I scrub these clean or just blast carb cleaner through the holes? I blasted one of the carbs and dislodged a black gunk, maybe that was the culprit




I also pulled the fuel intake hose to check the filter and it was clean
mistified is offline   Reply With Quote