View Single Post
Old July 10th, 2012, 11:51 AM   #13
dubojr1
ninjette.org certified postwhore
 
dubojr1's Avatar
 
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010

Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F

Posts: A lot.
Quote:
Originally Posted by flynjay View Post
When you install the KOSO gauges, what do you have to do wiring wise?
You have 1 wire to run straight to the battery (for gauge settings memory I believe), 1 wire to run to the coolant temp sensor (KOSO provided but replaces the stock sensor), 1 wire to run to your choice of an oil temp reading location (secondary drain plug in my case), and 1 wire to run for the speed sensor (located on the front wheel) and then the gauge plugs straight into the stock harness behind the dash. It gets everything else it needs from there.
__________________________________________________
09 250R SE: Paying it forward one post at a time!

Don't forget to add yourself to our Member Map
dubojr1 is offline   Reply With Quote