September 13th, 2019, 11:55 AM
|
#11
|
Rev Limiter
Name: Jay
Location: WI
Join Date: Jul 2013
Motorcycle(s): '06 SV650n, '00 Derbi GPR, '64 CA77 Dream 305, '70 CL450 Scrambler, numerous dirt bikes
Posts: A lot.
MOTM - Jun '18, Oct '16
|
Read through this section -
https://faq.ninja250.org/wiki/How_do..._the_valves%3F
"The factory clearance specifications are .08 - .13mm (0.003-0.005 inches) for the intake valves and .11 - .16mm (0.004-0.006 inches) for the exhaust valves."
|
|
|