ninjette.org certified postwhore
Name: Roger
Location: Mitchell, South Dakota
Join Date: Apr 2014
Motorcycle(s): 1978 Z1R, 1999 EX250
Posts: A lot.
MOTY - 2018, MOTM - Oct '16
|
The pics in the link (#8 above) are what I found cutting the front weld, I never did cut the rear one. The way it looked to me is the tubes and baffles in the muffler are all spot welded in place and would be pretty hard to take out without destroying the muffler. Of course the ones you have look to be gutted, with all the baffling and routing tubes removed by whatever means. It is tough to beat the performance of the factory engineered stock mufflers.
__________________________________________________
|