Quote:
Originally Posted by drstimpy
I had a problem with the R6 mod. It took up so much slack out of the cable that I couldn't adjust it back down against the idle adjuster stop. I would need a longer inner cable to make it work on my pre gen. I loved the way the quick twist felt though and would use it in a second if I could make it work.
|
I wonder if you are having the same problem I had. When I put the R6 throttle on, the throttle close stop was too long. It didn't allow the carb to close all the way on the return. So, I took about 1/4 inch off with my dremmel and it worked fine after that.
I read where some people dremmeled it down to match the stock throttle. But I didn't have to take off that much to make it work. Now I wish I had taken pics.