ninjette.org - View Single Post

jkv45 · August 20th, 2018, 09:00 AM

Most likely an electrical issue. Check the connector at the back of the gauge and any other main connectors from the battery to the gauges. Also look for any wires that may be pinched or turned tightly.

Check your battery voltage. It should be over 12.7V before starting and over 13V at idle. Confirm that the terminals are tight and follow the black cable to the ground point on the frame. Look for signs of corrosion where it attaches.

August 20th, 2018, 09:00 AM	#2
jkv45 Rev Limiter Name: Jay Location: WI Join Date: Jul 2013 Motorcycle(s): '06 SV650n, '00 Derbi GPR, '64 CA77 Dream 305, '70 CL450 Scrambler, numerous dirt bikes Posts: A lot. MOTM - Jun '18, Oct '16	Most likely an electrical issue. Check the connector at the back of the gauge and any other main connectors from the battery to the gauges. Also look for any wires that may be pinched or turned tightly. Check your battery voltage. It should be over 12.7V before starting and over 13V at idle. Confirm that the terminals are tight and follow the black cable to the ground point on the frame. Look for signs of corrosion where it attaches.