ninjette.org - View Single Post - Motion Pro Throttle sleeve for Pre-gen.

fast1075 · April 26th, 2014, 10:09 AM

I just finished doing this mod on my '06 model this morning. Wasn't hard to do. Had to cut the enclosed end of the tube off to remount my bar ends. Trimming the excess off the stops on the tube was easy using a bench grinder. After some deburring, it was ready to install.

Putting it back together was a PITA getting the cables in place. Well worth the effort IMHO. Just be aware it isn't a "drop in", and takes some futzing around. Going for an afternoon ride today, or a morning ride tomorrow to see how it works in real world riding conditions.

April 26th, 2014, 10:09 AM	#6
fast1075 ninjette.org guru Name: harry Location: Central Florida Join Date: Sep 2013 Motorcycle(s): 2006 Ninja 250, 2004 Buell XB12s, Honda 110 Elite Posts: 332	Me Too! I just finished doing this mod on my '06 model this morning. Wasn't hard to do. Had to cut the enclosed end of the tube off to remount my bar ends. Trimming the excess off the stops on the tube was easy using a bench grinder. After some deburring, it was ready to install. Putting it back together was a PITA getting the cables in place. Well worth the effort IMHO. Just be aware it isn't a "drop in", and takes some futzing around. Going for an afternoon ride today, or a morning ride tomorrow to see how it works in real world riding conditions. __________________________________________________ "They don't pay me enough to ride this thing!" Kenny Roberts after winning the Indy Mile on the TZ750 powered Grand National bike.