ninjette.org - View Single Post

Ash.007 · January 8th, 2021, 08:17 AM

I changed the big end bearings only then put everything back together...
Yes I did try turning the throttle a bit, no go...

I didn't drain the float bowls because when o took it off and had it on the shelf I thought most of it leaked out,
So that means carb to be restored

Well I got 1 friend give me a bottle of starting fluid, and another give me a 350ml spray bottle of 90% ethanol I got my spray bottle of fuel too. Which is the best option I should go with.
I'll put the battery back to charge.

January 8th, 2021, 08:17 AM	#25
Ash.007 ninjette.org member Name: Ash Location: South Africa Join Date: Jan 2019 Motorcycle(s): Kawasaki ninja 250R, Suzuki gsxr750 Posts: 14	I changed the big end bearings only then put everything back together... Yes I did try turning the throttle a bit, no go... I didn't drain the float bowls because when o took it off and had it on the shelf I thought most of it leaked out, So that means carb to be restored Well I got 1 friend give me a bottle of starting fluid, and another give me a 350ml spray bottle of 90% ethanol I got my spray bottle of fuel too. Which is the best option I should go with. I'll put the battery back to charge.