Quote:
Originally Posted by DannoXYZ
Would still hold in place since there's no turning torque on those pins. Even on race-bike, brake-caliper won't get too hot for too long (at least if you're going fast). Replacement pins come with blue threadlocker pre-applied to threads. Vibration can back it out due to such low torque for that size fastener. Avoid temptation to use more torque to hold it in as that will cause you issues when trying to remove later... damn $@)#&*! POs
|
I've always had trouble with those damn pins! I've always sprayed copper antiseize on em to help with the pin removal later.
I rounded out the hole for the allen wrench on that pin once and had a lovely time trying to extract the pin. After that it was anti seize all the way