View Single Post
Old April 15th, 2018, 06:59 PM   #1
Angel-be-Good
ninjette.org guru
 
Angel-be-Good's Avatar
 
Name: Ryan
Location: San Francisco
Join Date: Dec 2008

Motorcycle(s): '08 Ninja 250, '11 Street Triple R

Posts: 337
Swingarm spools (Ninja 400)

FYI, the Ninja 400 uses an 8mm thread size for its swingarm spools (rear stand spools). I believe my Ninja 250 used 10mm, so I ordered a set with 10mm threads...but too large

So 8mm threads it is. Obnoxiously, I could have found out sooner if I'd just pulled the spools off my 2011 Street Triple (they're also 8mm) but I was so sure the 400 would be the same as the 250...

In case there was any doubt the bike is all-new
__________________________________________________
The Sunday Best | Current mileage: 50,000
Angel-be-Good is offline   Reply With Quote