|
You can move the airbox back about an inch. I worked mine back to the point that the 'peg' came out of the rubber gromet up top on the right side. Like slick says you need to remove the 2 screws that hold the box in place. They are kind of tucked away, at least the one on the left side down towards the footpeg is. Once I got the airbox to move back I removed the boots to the intake, that will give you an inch or so of room in front of the carbs. I took the screw out of the clamp on the boot from the airbox to the carb and popped the clamp apart with my finger to make sure if was free from the seat it made in the rubber. Don't know if it was necessary but the carbs came out real easy. Then just wiggle the carbs out of the boots on the airbox.
I don't know if you guys removed your gas tank but I did.
|