ninjette.org - View Single Post

jhey42.1 · June 24th, 2015, 11:57 AM

I just went through this on my 07. It turned out to be a choke slide screw that was to tight and binding, not letting the chock return spring do its job. At the handle bar the choke was off, at the other end of the cable the choke was still one because it could not slide back to the throttle/brake side of the bike.

SO before you go taking everything apart, get your finger down in there and check that there is no binding on the mechanism.

My two cents.

June 24th, 2015, 11:57 AM	#6
jhey42.1 ninjette.org newbie Name: John Location: Asheville NC Join Date: Jun 2015 Motorcycle(s): 2007 Ninja 250R Posts: 4	High Idle thoughts I just went through this on my 07. It turned out to be a choke slide screw that was to tight and binding, not letting the chock return spring do its job. At the handle bar the choke was off, at the other end of the cable the choke was still one because it could not slide back to the throttle/brake side of the bike. SO before you go taking everything apart, get your finger down in there and check that there is no binding on the mechanism. My two cents.