Hi and welcome!!! Easy way to find connector is to trace wiring from where it leaves back of light. Some some tests to troubleshoot:
1. Check that bulb is good. Remove bulb from light and connect to battery with jumper cables. If bulb lights, it’s good and problem is wiring. Put bulb back.
2. Once you find correct wiring-connector unplug light from it. With key ON, and blinkers on,measure for voltage on both connector terminals on harness. One should be at battery voltage.
Last futzed with by DannoXYZ; June 26th, 2018 at 08:15 PM.
|