View Single Post
Old July 14th, 2012, 11:04 AM   #40
mkulchar
ninjette.org member
 
mkulchar's Avatar
 
Name: matthew
Location: niagara
Join Date: Jul 2011

Motorcycle(s): 2010 250r ninja

Posts: 115
ok, so cleaned out my carbs and turns out the seafoam clogged all the pilot jet holes in the carb itself so it wasntgetting any fuel. took long time but got it out and the bike starts u and runs.

My problem that is left now is when i drive normally from 6-7k and below and i come to a stop the bike returns to normal rpms of 1.5k no problems.

BUT when i go WOT and come to a stop the rpms drop to 3k and sit there. then very slowly drops to 2 then hovers there then slowly drops to 1.5. ALSO can only get the bike to 130kph. it rides to redline no problem till u get to 5th or 6th then stops at say 9-10k at 130kph. basically the same problem as using the 98djs. before the exhaust was able to get to 160 with ease.



Using 100dj main jets with 2ish turns on mixture. 38pilots
mkulchar is offline   Reply With Quote