Thread: Plastic Rivet
View Single Post
Old February 2nd, 2014, 11:31 AM   #2
corksil
ninjette.org certified postwhore
 
Name: TC
Location: Hawaii
Join Date: Sep 2013

Motorcycle(s): A lot.

Posts: A lot.
If this isn't in a sticky/faq somewhere I'd be surprised.

I'm going to look up the sizes/etc right now and try and find some part numbers because all my plastic connectors are broken/lost/non-existent from PO.

edit....

So the well nuts are #92210-0498 (5mm, qty listed = ten, but from the looks of it you might need a few more.)

The smaller push-type rivets that hold the (colored) fairings to the front upper/under/black cowling are #92039-0060 and qty listed = 6, which is indeed correct.

And the three push-type rivets you need to hold the two (colored) fairings together along the bottom are #92039-0014. Qty listed = 3.

Then there are the silver socket head screws/washers that hold everything together but you can look those up for yourself because there are different lengths.

It's all in the sticky at the top of this tech-talk section. Go to part diagrams and it will link you to kawasaki part schematics.
corksil is offline   Reply With Quote