ninjette.org - View Single Post

Raddad70 · June 20th, 2019, 05:06 PM

Thanks, I will check those out. I plugged the vac port that connects to the tank and have it gravity fed it the other hose that goes between the carbs is intact. It’s the silver disk looking things on the side of the carbs right? Also I do want to adj the mixture screws. 2.5 turns about right and is it turn in to richen ond out to lean? It’s not backfiring just popping a bit.

June 20th, 2019, 05:06 PM	#48
Raddad70 ninjette.org member Name: Dave Location: Pittsburgh Join Date: Jan 2019 Motorcycle(s): Honda cx650, 2005 ninja 250 Posts: 45	Thanks, I will check those out. I plugged the vac port that connects to the tank and have it gravity fed it the other hose that goes between the carbs is intact. It’s the silver disk looking things on the side of the carbs right? Also I do want to adj the mixture screws. 2.5 turns about right and is it turn in to richen ond out to lean? It’s not backfiring just popping a bit.