ninjette.org - View Single Post - Kawasaki ZX Ignition Coil Pack/ coil over plugs (CoPs) modification.

Ghostt · October 30th, 2015, 04:05 PM

Update:

Some concerns about supporting the CoPs has come up, so I decided to look into this.

The fix is simple, remove the rubber tops from the OEM plug caps, and install them on the CoPs. You will need to remove the small rubber ring on the top of the CoPs, and slide the OEM rubber on, after that your all set.

October 30th, 2015, 04:05 PM	#3
Ghostt in your machine Name: Scott Location: Summer Shade, Ky. Join Date: Oct 2014 Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN" Posts: A lot. Blog Entries: 25 MOTM - Jun '17, May '16, Mar '15	Update: Some concerns about supporting the CoPs has come up, so I decided to look into this. The fix is simple, remove the rubber tops from the OEM plug caps, and install them on the CoPs. You will need to remove the small rubber ring on the top of the CoPs, and slide the OEM rubber on, after that your all set. __________________________________________________ *violente et ignorantia* ZX-2R BLOG *Twitter and Instagram = Ghostt_Scott* *I'm not here to change your mind, just to inform.*
	1 out of 1 members found this post helpful.