Raising ride height?
What I'm doing is trying a 150/60 rear tire which should lower my bike roughly .5" in the rear but I'd like to end up a little higher than stock so when I install the Gsxr600 shock, I plan to use Ninja 500 dogbones (which should raise it about 1" so I have read) and I'll end up .5" higher than stock in the rear.
I'm wondering how much to raise the front to keep the same geometry? Do I raise the front the same .5" or is there some formula I need to follow?
The other thing is, I have added an Ohlins fork cartridge kit but I want to keep the oem handlebars in the stock position which isn't possible since the Ohlins fork caps sit 7mm taller than the forks. I either need to drop the forks or add risers...
I am wondering If I need to drop the forks (raise the front) anyway since the rear will be a bit higher after the new tire and dogbones which would mean I can just run the stock handlebars like usual?
|