|
As for water, general consensus is no, it won't get in.
I'm pretty sure the ECU controls the amount of fuel going into the cylinders, not the air at all. It just measures the temp of the air.
As for actually removing the snorkel, someone did it. I believe it's earlier in the thread, but i might be wrong.
let me search a little for it here...
*edit*
so apparently I was thinking about the Kleen Air system removal. Someone did a DIY on how to do that with an EFI 250R.
If you want to do it to your EFI ninja, do it. The mix might be rich enough that the snorkel removal will lean it out. The mix might be so spot on that taking off the snorkel makes it too lean. I really don't know. Try it. The worst thing that happens is you would have to put the snorkel back on, or get a powercommander. Only way you'll know if it works is if someone tries and posts up with results.
*/edit*
|