View Single Post
Old November 25th, 2021, 12:05 AM   #161
DannoXYZ certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011

Motorcycle(s): CB125T EX250F-street Ninja250R-race CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR VFR750F

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
Originally Posted by Bob KellyIII View Post
I am still completely confuzed as to how and why both plug ins to the back brake light switch have 12VDC going to them....
it's my understanding from studying the wireing diagram that the white wire should be "hot" and the brown one should be grounded through the bulb.
I guess the thing to do now is trace the stop light bulb power back to the battery and try and find out WHY the brown wire has power in it when it shouldn't....
Bob... system is POSITIVE ground with +12v terminal of battery connected to ground. Trace cable from battery positive cable and see where it goes. Normal to have constant +12v on both terminals of bulbs when not lit. Then switch connects other side to battery -neg of battery.
DannoXYZ is offline   Reply With Quote