Quote:
Originally Posted by Racer x
My 250 should be done soon. I am having custom made cams. From mega cycle. The bottom is balanced the head is ported and they're working on te cams now. They have increase the duration. Now my builder has to determin the lift and send the cams back. Should be interesting to compare with the other cams
|
What pistons you running in this engine?
I wanted to do the same with my stock cams but the guys I mentioned above could not degree it because the spacing between lobe and journal was too small for their tool's. Only guys in my state that do this stuff to, so I went aftermarket.