|
Generic fit clip-on bars ( by fork tube diameter) won't have clearance UNDER the triple clamp. (With or without risers. ) They won't fit. Unless you don't mind cutting the bikes plastic.
Woodrcaft, and Driven make a set for our ninjas.Not just by the fork tube diameter, but machined so that there is no interferance from the risers, hitting the bottom of the triple clamp. But it is still a very tight clearance fit ( full lock to lock, and finger placement. But they will work, if mounted under the triple clamp.
I tried taking photos of the mess, but due to angles, and such, hard to give a thorough idea. I'll try to make a reasonable scematic/ drawing of the issues "generic" fit clipons give, no matter which way they are turned or rotated.
|