View Single Post
Old April 16th, 2015, 09:35 PM   #13
Ghostt
in your machine
 
Ghostt's Avatar
 
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014

Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN"

Posts: A lot.
Blog Entries: 25
MOTM - Jun '17, May '16, Mar '15
Quote:
Originally Posted by bmurray View Post
16017 is the port that the needle goes into, correct? Just kind of sits there when you take the diaphragm/slide/needle out? Pretty sure mine it too wide on the short side to mistakenly put it the wrong way. The long side fits nicely.
Part# 16017 sits between the main jet holder and carburetor body itself. Make sure these are installed properly, If I remember correctly the tapered side goes up, and should be easily seen in the carburetor bore.

Stupid question time, have you tried the bike with the airbox hooked up?
__________________________________________________
violente et ignorantia

ZX-2R BLOG
Twitter and Instagram = Ghostt_Scott
I'm not here to change your mind, just to inform.

Last futzed with by Ghostt; April 16th, 2015 at 10:51 PM.
Ghostt is offline   Reply With Quote