ninjette.org - View Single Post

DannoXYZ · April 25th, 2019, 10:44 AM

Saw a racer fail tech-inspection for this issue.
Guy was on side trying to figure out what to do.
Another tech-inspector came over, took a look at it, and told him, "Duct-tape it!"

That was also their solution couple months earlier when rental U-haul trailer gouged hole in my belly-pan.

Of course, since this is a non-structural part, it can be repaired easily with some light tapping from inside, and TIG torch... or fibreglass... or some pigeons...

Get rid of those sliders too...

April 25th, 2019, 10:44 AM	#5
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	Saw a racer fail tech-inspection for this issue. Guy was on side trying to figure out what to do. Another tech-inspector came over, took a look at it, and told him, "Duct-tape it!" That was also their solution couple months earlier when rental U-haul trailer gouged hole in my belly-pan. Of course, since this is a non-structural part, it can be repaired easily with some light tapping from inside, and TIG torch... or fibreglass... or some pigeons... Get rid of those sliders too... Last futzed with by DannoXYZ; April 26th, 2019 at 12:29 PM.