ninjette.org - View Single Post

SibSerge · December 24th, 2019, 06:35 PM

theoretically tapping from the inside to straighten it out and gluing on the oudside with a piece of aluminum patch and jbweld should do. The crankcase is under a negative pressure while running so even a ducktape will seal it

December 24th, 2019, 06:35 PM	#7
SibSerge ninjette.org member Name: Sergey Location: Ontario, GTA Join Date: Oct 2019 Motorcycle(s): Ninja ZZR250 (EX250H) Posts: 213	theoretically tapping from the inside to straighten it out and gluing on the oudside with a piece of aluminum patch and jbweld should do. The crankcase is under a negative pressure while running so even a ducktape will seal it