ninjette.org - View Single Post - 08Ninja250R

Bob KellyIII · November 21st, 2021, 04:13 AM

DIRTY CARBURATOR buddy !
sounds like the main jet is completely plugged in one or both of the carbs.
... remove the fairings and tank and pull both carbs put them on the bench and strip them completely.... clean every hole ! ( just squirting carb cleaner in each hole is not enough).
I bought a carb cleaning brush set on e-bay and a carb cleaning wire probe set
those tools help immensely ! DO NOT get carb cleaner on the carb rubber parts
keep each carb separate from each other and be careful ! this is delicate work
it will take you all day ! and it's not an easy job.
good luck
....
Bob.......

November 21st, 2021, 04:13 AM	#55
Bob KellyIII Retired motorcycle Mc. Name: Robert Location: Weed, California. Join Date: Jul 2021 Motorcycle(s): 2012 Kawasaki Ninja 250R, 2021 CSC TT250, 1977 Triumph Bonneville 750cc,2001 Honda XR650L. Posts: A lot.	DIRTY CARBURATOR buddy ! sounds like the main jet is completely plugged in one or both of the carbs. ... remove the fairings and tank and pull both carbs put them on the bench and strip them completely.... clean every hole ! ( just squirting carb cleaner in each hole is not enough). I bought a carb cleaning brush set on e-bay and a carb cleaning wire probe set those tools help immensely ! DO NOT get carb cleaner on the carb rubber parts keep each carb separate from each other and be careful ! this is delicate work it will take you all day ! and it's not an easy job. good luck .... Bob....... __________________________________________________ Its too late when you've gone too far !