Quote:
Originally Posted by n4mwd
If its set up the same as the pregen, you will need a small wheel puller to push the cap down while you fish out the old retaining ring. This is done while the tubes are still in the forks.
|
It it ok if I do this first before taking the front wheel off? Because I dont' have a front stand it might be more stable to push down with the front wheel still on.
On the side note: What is this "
Inside the lower cylinder is a pin with a small spring and a silver tapered cap. These will fall out once you pull the fork apart" that the OP mentioned? I didn't see it in any of his pictures. Is it easy to put back. I don't want to lose it when I pull the fork out.