ninjette.org - View Single Post - DIY

Sound Wave · April 18th, 2009, 07:20 PM

thanks for this DIY. i got my HIDs hooked up. found two broken fairing rubber nut thingys. those things are junk. still running the stock fuse and it seems to be ok. gotta remember to go and get another spare fuse. wouldn't want to blow the fuse at night.

QUESTION:

so i marked on the wall the height at which my stock light was... both for low and high beam. after my install, i checked the level again. i can't get both to be in their original levels at the same time. for now, i got the low beams set correctly. the high beam is higher than before. i figure that i won't be riding with the high beams on if there is oncoming traffic or someone ahead of me anyways.

so my question is, is there a way to adjust the level so that both are correct? from what i can tell, there is only one vertical knob that adjusts both of the beams. thanks in advance.

April 18th, 2009, 07:20 PM	#170
Sound Wave Ramen Rider Name: Gary Location: Honolulu, Hawaii Join Date: Jan 2009 Motorcycle(s): 2015 BMW R1200R, 08 Honda VFR800A (sold), 09 Ninja 250R (sold) Posts: A lot.	thanks for this DIY. i got my HIDs hooked up. found two broken fairing rubber nut thingys. those things are junk. still running the stock fuse and it seems to be ok. gotta remember to go and get another spare fuse. wouldn't want to blow the fuse at night. QUESTION: so i marked on the wall the height at which my stock light was... both for low and high beam. after my install, i checked the level again. i can't get both to be in their original levels at the same time. for now, i got the low beams set correctly. the high beam is higher than before. i figure that i won't be riding with the high beams on if there is oncoming traffic or someone ahead of me anyways. so my question is, is there a way to adjust the level so that both are correct? from what i can tell, there is only one vertical knob that adjusts both of the beams. thanks in advance.