in your machine
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014
Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN"
Posts: A lot.
MOTM - Jun '17, May '16, Mar '15
|
Another Sunday more boring progress,
So now that I decided to go with a pod filter I have two problems, first was the crankcase breather, second was the air temperature sensor.
After looking at both hoses, 98(left) 17(right).
I decided to go with the 98, it just looked better, and wasn't hanging with unsupported weight.
While this looks better, we shall see how much oil leaks out. In the event that happens I go to the 17 one and zip tie up.
Air temperature sensor mounting location is left to the wiring as I didn't want to cut it, I then used a 1/4" drill bit, then I used a 3/8"drill bit a little so the sensor sits flush.
After that I started mocking up the 300 dash, I also got the plastic too, and started doing some trimming.
Used a busted up fairing, didn't want to mess up my nice one.
__________________________________________________
violente et ignorantia
ZX-2R BLOG
Twitter and Instagram = Ghostt_Scott
I'm not here to change your mind, just to inform.
|