ninjette.org - View Single Post

CZroe · October 31st, 2009, 02:47 AM

Back in GA, my friend assured me that he could remove the screws from the front brake reservoir using a certain screw driver (can't recall if it were one of mine or one from the bike's tool kit). I told him that I didn't do it myself because I could tell that it was going to slip and I was looking for the right screwdriver. This prompted him to try it himself to prove it to me. The screw immediately chewed up and the driver spun in place despite all the weight he was putting into it. Now I have a nice shiny bit of silver staring at me wherever I go! Idiot. I colored it black again with a Sharpie but that didn't last long.

October 31st, 2009, 02:47 AM	#26
CZroe CPT Falcon Name: J.Emmett Turner Location: Newnan, GA Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.	Back in GA, my friend assured me that he could remove the screws from the front brake reservoir using a certain screw driver (can't recall if it were one of mine or one from the bike's tool kit). I told him that I didn't do it myself because I could tell that it was going to slip and I was looking for the right screwdriver. This prompted him to try it himself to prove it to me. The screw immediately chewed up and the driver spun in place despite all the weight he was putting into it. Now I have a nice shiny bit of silver staring at me wherever I go! Idiot. I colored it black again with a Sharpie but that didn't last long.