View Single Post
Old June 18th, 2018, 06:32 PM   #12
Zww1019
ninjette.org member
 
Name: Zak
Location: Ft. Lauderdale
Join Date: Jun 2018

Motorcycle(s): Ninja 250r

Posts: 18
Quote:
Originally Posted by jkv45 View Post
Check the starter relay and the wiring to and from the starter button. Cross the starter relay terminals with a large screwdriver to "jump" it (sparks may fly) and see if the starter spins.

Edit: Thanks for the help and quick respond btw!

The lack of change in the voltage tells you there is no power being sent to the starter.
I updated my post to add this, but I did try bypassing the starter relay:

“Bypassing starter solenoid causes a small spark and dashboard lights immediately shut off. They stay dimmed for a bit (after removing bypass wire) depending on how long I have the wire bypassing the starter solenoid connected. Still no click/turning over or attempt to start with the starter solenoid bypassed.

****Possible buzzing coming from CDI ignition module (I indistincly heard a very minimal and slight buzzing from under back seat rest, upon removing the CDI box I (think) I could no longer hear the buzzing). Would this cause my symptoms, and is there anyway to test—from what I’ve read it’s only possible to test with a new CDI ignition module, and only causes no spark issues.”
Zww1019 is offline   Reply With Quote