View Single Post
Old April 29th, 2014, 08:00 PM   #33
mandeec54
CruiserChick
 
Name: Amanda
Location: North Chicago,IL
Join Date: Apr 2014

Motorcycle(s): 83 Yahama Virago 500

Posts: 6
I didn't really read through all the posts however it is a grounding issue, if you have not touched anything then make sure that first off the negative to the battery is tight. Next start checking grounds, and check the battery if there is crud anywhere clean it off, it may not be making a good connection, which in turn means it will not send power then send power then that can blow the fuse. If the grounds look good check the positive cable, especially in pinch points. The wire can become framed, if that cable touches something metal (like your frame) it will ground it out, eventually blowing the fuse.
mandeec54 is offline   Reply With Quote