ninjette.org - View Single Post

wayanlam · September 9th, 2011, 02:13 AM

what might be the cheaper and more secure solution would be to just buy the custom bracket and the voltmeter from here, and buy the Koso speedometer in america. they also have a P&P harnes kit for the ninja250.

the only difference is that you will need to splice in the voltmeter yourself. the rest should be roughly the same.

that would cost $145 for the voltmeter and bracket only. this would make the shipping cheaper too, since it would be much lighter, than sending the whole kit.

that's another idea for you to consider.

W

September 9th, 2011, 02:13 AM	#20
wayanlam ninjette.org certified postwhore Name: Wayan Location: Bali - Indonesia Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.	what might be the cheaper and more secure solution would be to just buy the custom bracket and the voltmeter from here, and buy the Koso speedometer in america. they also have a P&P harnes kit for the ninja250. the only difference is that you will need to splice in the voltmeter yourself. the rest should be roughly the same. that would cost $145 for the voltmeter and bracket only. this would make the shipping cheaper too, since it would be much lighter, than sending the whole kit. that's another idea for you to consider. W __________________________________________________ Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield