Quote:
Originally Posted by Mr.E
Do you mean the spot where you insert the wire is a little too big? If so, this is normal. Mine was a bit larger too, but it stays in and works perfectly. Just make sure to prop that tab up like he states to do.
As for the two in one wire, Im not too sure, but I think my wire was slightly different looking too. As long as you test your blinkers before putting back on the fairings, and they work, you will be fine.  |
No the other way around, the hole in the plug is too small for the wire/s. The gold plated connector is too big to fit in the harness. Like I said its wedged in there as far as I could get it and doesnt appear to be coming out, and everything is working fine, I just wanted to verify that i was just being put there to keep it out of the way as there is nothing on the other plug to connect to at that spot in the harness.