ninjette.org - View Single Post - DIY - Replace the '08+ CDI (Ignitor) with the '88-94 CDI

ztrack157 · August 30th, 2009, 02:23 PM

John I'm at 41 until 9500 rpm then went from 39 to 40 for that spot. Then 41 the rest of the way.12000 up on the tis comes programmed at 40 so I went to 41 per Bram's advice. If you were to go to 42.5 I would only do it over 12000 rpm. otherwise its like putting more water in an already full barrel. there no use or point.

August 30th, 2009, 02:23 PM	#76
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	John I'm at 41 until 9500 rpm then went from 39 to 40 for that spot. Then 41 the rest of the way.12000 up on the tis comes programmed at 40 so I went to 41 per Bram's advice. If you were to go to 42.5 I would only do it over 12000 rpm. otherwise its like putting more water in an already full barrel. there no use or point. __________________________________________________ Sportisimoto USA is born.