Quote:
Originally Posted by DaBlue1
Have you adjusted the idle speed?
The idle speed can be adjusted by turning the idle adjust knob, which is located on the left side, right under the carburetor. The idle speed should be adjusted (after the bike is completely warmed) to 1300 (+/- 100) rpm.
|
Thanks yep, I have adjusted it down and up. The adjustment works fine. Its just a problem after it warms up.
Quote:
Originally Posted by Ninjinsky
If it was gunked up you may need to clean the idle jets and passages again As well as fit a fuel filter (cheap as chips.)
I had a rusty tank and it took 3 cleans in the end even after fitting the filter.
It is a PITA getting the carbs out but the more you do it the faster you get soon it is no more hassle than, say, moving house LoL
|
Ok. I will pull them again. I dont believe I checked the inlet finger screen(didnt know there was one until I read about them on here). The carbs looked pretty clean last time.