Quote:
Originally Posted by skrymir69
.... I put an inline filter on the fuel line so i could see if fuel was getting to the carbs and it is always full. Plus I pulled the drain plug on the right carb and got a ton of gas out of it, when it was not starting after getting hot.
|
Quote:
Originally Posted by g21-30
....If you have a see thru inline fuel filter, I bet that is your problem.
|
+1
I had a similar issue a long time back. The fuel filter could not keep of the flow of fuel to the carbs after a while. At low speeds it was good. After it warmed up and higher speeds, the filter decreased the flow of fuel.
Also if the fuel lines are too long it may slow the gravity feed. lines should be as direct as possible to the carb.
I took this filter off and it's been fine ever since. Most inline filters work and some don't.