ninjette.org - View Single Post - slow return to idle

bosozoku · August 17th, 2018, 09:28 AM

Thanks -- wondering if the old hoses may have a leak we can't see or leaky connection at one of the barbs.

We opened the enricher again, pulled the diaphragm, and polished the brass post as it had some tarnish. Hoping this may help in the operation of the air cut valve. Rubber seemed fine. Surprising how much spring pressure there is in the enricher.

August 17th, 2018, 09:28 AM	#6
bosozoku ninjette.org newbie Name: Jesse Location: Eastern PA Join Date: Aug 2018 Motorcycle(s): Ninja 250 Posts: 4	Thanks -- wondering if the old hoses may have a leak we can't see or leaky connection at one of the barbs. We opened the enricher again, pulled the diaphragm, and polished the brass post as it had some tarnish. Hoping this may help in the operation of the air cut valve. Rubber seemed fine. Surprising how much spring pressure there is in the enricher. Last futzed with by bosozoku; August 17th, 2018 at 11:04 AM.