October 31st, 2017, 11:45 AM
|
#11
|
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011
Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C
Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Quote:
Originally Posted by verboten1
I've fit the wheel in the swingarm, but just barely. I think that the sprocket carrier will need to be milled down as well. I did that when I put the SV650 wheel in the 86 ninja swinger on my CB550F
I gave up on it, but if you need a swinger or wheel, I have them laying around
*edit*
I knew I had taken pictures at some point.
https://www.ninjette.org/forums/show...6&postcount=94
|
Ah, thanks. I figured I'd have to move the sprocket inwards by at least same amount left-spacer was shaved down. Simple enough remove studs and mill that down.
|
|
|