ninjette.org - View Single Post

ninjamunky85 · June 13th, 2013, 07:11 PM

Well, it's been a little over two weeks since I've had my 300. It's been an all around awesome bike imo. Anyway here's some of the mods that I've done so far.

As seen before: SS fender eliminator

Changed the fake carbon fiber tank protector for the real thing, and added some stomp-grip, more on that later...

Woodcraft clip-ons 2 1/2" rise, and some new grips. I kept the stock bar ends.

These required some grinding away of a little material on the triple tree, to get the correct angle on the bars, but nothing major. Overall I liked the more aggressive position of the clip-ons. It did leave my legs feeling a little bit cramped though, so I got these.

Yoshimura rearset adjusters

Getting the right one on took a little "adjustment", but it went on just fine. I don't plan on keeping the stock exhaust anyway. I haven't taken a ride since I've done this mod yet, but I like where it puts the pegs at from sitting on the bike.

Overall I'm happy with all the mods I've done so far, and only have a few more planned. more on the stomp-grip later, but basically it turned out looking like crap.

June 13th, 2013, 07:11 PM	#1
ninjamunky85 Que Buenos Son!!! Name: Ryan Location: Grovetucky, OH Join Date: Jun 2012 Motorcycle(s): Aprilia Shiver 750, Husaberg FE 450, Ninja 300 (sold), xr100 Posts: A lot. MOTM - Nov '14	My mods so far... Well, it's been a little over two weeks since I've had my 300. It's been an all around awesome bike imo. Anyway here's some of the mods that I've done so far. As seen before: SS fender eliminator Changed the fake carbon fiber tank protector for the real thing, and added some stomp-grip, more on that later... Woodcraft clip-ons 2 1/2" rise, and some new grips. I kept the stock bar ends. These required some grinding away of a little material on the triple tree, to get the correct angle on the bars, but nothing major. Overall I liked the more aggressive position of the clip-ons. It did leave my legs feeling a little bit cramped though, so I got these. Yoshimura rearset adjusters Getting the right one on took a little "adjustment", but it went on just fine. I don't plan on keeping the stock exhaust anyway. I haven't taken a ride since I've done this mod yet, but I like where it puts the pegs at from sitting on the bike. Overall I'm happy with all the mods I've done so far, and only have a few more planned. more on the stomp-grip later, but basically it turned out looking like crap. __________________________________________________ Don't do something because it's easy,.. Do it because it's not! If you aren't going forward, then you're falling behind. "Drive it like you stole it"!!!