Quote:
Originally Posted by Triple Jim
If it does a small hands-off wobble after you put in the new steering bearings, my recommendation would be to ride, enjoy the bike, and keep your hands on the bar.
|
But it takes 2 hands to wave at all your fans!
Quote:
Originally Posted by Redsvt
Exactly where I am at. Bearings on order.
|
If the bearings were bad before you tightened them up, I would expect a freshly torqued stem nut to only last a short while before it's loose again. But adjusting head nut torque is easy and free so why not try. If the bearings are boogered up the only solution is to get them out.